|
|
Easy to fit,
reliable and designed for minimum drag. These are tough and reliable rudders,
that are very well made and finished.
Rudders feature
-
- Cast aluminum
casings
- Machined
aluminum blades
- Marine
grade stainless steel fixings
- Durable
epoxy coatings on blades and casting
Rudders can be supplied with custom blade lengths. Drop me an email and I'll get a quote and deliver time.
|
Rudder |
Mount |
Blade
Size |
Comments |
|
|
Horizontal
plate, 3 screws, fixed to rear deck. |
340mm |
Multisport Rudder
Blade
is spring loaded and rotates vertically about 100 degrees. This allows it to slide over logs etc, as you paddle and returns to vertical. Manual lifting and clearing can be done by attaching a pull cord to the rotation limit lever.
Blade
is hydrodynamic in shape and reduces drag by 30% compared with
flat plate blades.
$125
|
 |
Vertical
cleavis, 3 screws fixed to transom.
Rudder is fixed to cleavis with 3/8" stainless steel pin.
|
525mm |
Sea Kayak Rudder - DBL
Rotates
vertically 270 degrees to lay flat on rear deck using draw cord (not supplied) to lift, lower, and lock in position.
This is a large rudder suitable for double sea kayaks.
Blade
is hydrodynamic in shape and reduces drag by 30% compared with
flat plate blades.
$162
|
 |
Vertical
pin into tube in transom. Retaining washer used to lock in place. |
508mm |
Sea Kayak Rudder - SNG
Rotates
vertically 270 degrees to lay flat on rear deck using draw cord (supplied) to lift and lower.
Blade
is hydrodynamic in shape and reduces drag by 30% compared with
flat plate blades.
The mounting shaft is 3/8" diameter and may fit many existing rotomolded kayaks that already have the mounting hole in the transom.
$140
|
|
|
|
|
|
| Tension Spring for multisport rudder only. |
|
|
|
All rudders can be supplied with a custom blade length.
|
