|
|
Rudders
Easy to fit,
reliable and designed for minimum drag. These are tough and reliable rudders,
that are very well made and finished.
Rudders feature
-
- Cast aluminum
casings
- Machined
aluminum blades
- Marine
grade stainless steel fixings
- Durable
epoxy coatings on blades and casting
Rudders can be supplied with custom blade lengths. Drop me an email and I'll get a quote and deliver time.
Rudder |
Mount |
Blade
Size |
Comments |
 |
Horizontal
plate, 3 screws, fixed to rear deck. |
|
Multisport Rudder
Blade
is spring loaded and rotates vertically about 100 degrees. This allows it to slide over logs etc, as you paddle and returns to vertical. Manual lifting and clearing can be done by attaching a pull cord to the rotation limit lever.
Blade
is hydrodynamic in shape and reduces drag by 30% compared with
flat plate blades.
$125
|
 |
Vertical
cleavis, 3 screws fixed to transom.
Rudder is fixed to cleavis with 3/8" stainless steel pin.
|
525mm |
Sea Kayak Rudder - DBL
Rotates
vertically 270 degrees to lay flat on rear deck using draw cord (not supplied) to lift, lower, and lock in position.
This is a large rudder suitable for double sea kayaks.
Blade
is hydrodynamic in shape and reduces drag by 30% compared with
flat plate blades.
$162
|
 |
Vertical
pin into tube in transom. Retaining washer used to lock in place. |
508mm |
Sea Kayak Rudder - SNG
Rotates
vertically 270 degrees to lay flat on rear deck using draw cord (supplied) to lift and lower.
Blade
is hydrodynamic in shape and reduces drag by 30% compared with
flat plate blades.
The mounting shaft is 3/8" diameter and may fit many existing rotomolded kayaks that already have the mounting hole in the transom.
$140
|
| |
|
|
|
OZO Rudder Peddles
OZO Peddles are a very well made from injection molded high density plastic. The system incorporates a strong, comfortable footrest, steering peddle, and rails for length adjustment.
The OZO sytem is used in a number of racing and sea kayaks and has been tested and proven to be easy to use, durable, and reliable.
Easy to fit,
reliable and designed for minimum drag. These are tough and reliable rudders,
that are very well made and finished.
Rudders feature
-
- Cast aluminum
casings
- Machined
aluminum blades
- Marine
grade stainless steel fixings
- Durable
epoxy coatings on blades and casting
Rudders can be supplied with custom blade lengths. Drop me an email and I'll get a quote and deliver time.
| |
Size (mm) |
Description |
 |
Rail
454 long x 35 high |
Each pair consists of rails with 18 adjustment stop holes at 22 mm centers.
Adjustable webbing straps allow rudder centering and peddle angle adjustment.
Peddle leg length is adjusted by pulling the spring loaded locking pin, using the half circle handles on the inside end of each footrest, and sliding the peddle along the rail.
Weight 1lb 5 oz (595 g)
|
 |
Shock cord spring returns keep the rudder cables taught.
Using the webbing toggle to adjust the angle of the steering peddle and center the rudder.
This photo also shows the locking pin handle on the end of the footrest. |
 |
Vertical Hull Rails These rails are for mounting on kayak hulls where the sides are vertical or near vertical.
Vertical Rails & Peddle Set
$75 |
 |
Angle Hull Rails
These rails are molded with a 22 degree angle to allow for angled hull sides.
Angled Rails & Peddle Set
$75
|
 |
Rail to Hull Mount
Mounting to the side of the kayak is via 3 screw holes molded in 210mm centers.
vertical rails have threated holes for supplied stainless steel bolts.
Angled rails have 5 mm unthreaded holes for supplied stainless steel self tapping screws. |
Spectraspeed™ Rudder Cable
Spectraspeed™ gets it's unique properties from a spinning process that eliminates movement between the core and sheath. This makes it very stable with virtually no stretch factor.
- Minimal stretch, slippage, or creep
- 295 kg (649 lb) break strain
$0.60 per foot - specify length at checkout. |
 |
Polypropylene |
2mm dia |
|
|
