|
|
OZO Peddles are a very well made from injection molded high density plastic. The system incorporates a strong, comfortable footrest, steering peddle, and rails for length adjustment.
The OZO sytem is used in a number of racing and sea kayaks and has been tested and proven to be easy to use, durable, and reliable.
| |
Size (mm) |
Description |
 |
Rail
454 long x 35 high |
Each pair consists of rails with 18 adjustment stop holes at 22 mm centers.
Adjustable webbing straps allow rudder centering and peddle angle adjustment.
Peddle leg length is adjusted by pulling the spring loaded locking pin, using the half circle handles on the inside end of each footrest, and sliding the peddle along the rail.
Weight 1lb 5 oz (595 g)
Vertical Rails & Peddle Set
$75
Angled Rails
& Peddle Set
$75 |
 |
Shock cord spring returns keep the rudder cables taught.
Using the webbing toggle to adjust the angle of the steering peddle and center the rudder.
This photo also shows the locking pin handle on the end of the footrest. |
 |
Vertical Hull Rails These rails are for mounting on kayak hulls where the sides are vertical or near vertical. |
 |
Angle Hull Rails
These rails are molded with a 22 degree angle to allow for angled hull sides. |
 |
Rail to Hull Mount
Mounting to the side of the kayak is via 3 screw holes molded in 210mm centers.
The vertical rails come with pre-threated holes and stainless steel bolts. Angled rails have 5 mm holes, unthreaded for supplied stainless steel self tapping screws. |
|
